IEC 320 C14 to C13+C5 Y splitter: Converts a single C14 inlet into two outputs (C13 and C5) to power two devices from one socket on a PDU or UPS. Rated for 10 A at 250 V. The wire core is 3 x 0.75 mm² of pure copper for low heating, low resistance, and good conductivity. Key features - Dual outputs from one inlet: C14 input with two outputs (C13 and C5) to power two devices simultaneously from a single socket on a PDU or UPS. - Robust conductor and performance: 3 x 0.75 mm² pure copper wire core provides reliable current transfer with reduced heat generation. - Durable insulation: thickened PVC outer jacket with high toughness and tensile strength. - Safety and compatibility: heat resistant, flame retardant outer cover designed to help prevent leakage. Use scenarios - Connect two devices (eg, a PC and a peripheral) from a single C14 outlet on a UPS or rack PDU. - Extend a limited plug or simplify wiring in a server room, data cabinet, or home/office setup. - Conveniently power two devices from one wall or rack outlet without compromising performance. Specifications at a glance - Model: IEC 320 C14 to C13+C5 Y splitter - Inlet: C14 - Outlets: C13 and C5 - Wire core: 3 x 0.75 mm² pure copper - Rating: 10 A / 250 V - Outer jacket: thickened PVC, flame retardant, heat resistant Professional, clear, and practical, this splitter cable provides a stable, efficient solution for powering two devices from a single C14 source while maintaining safety and wiring convenience.