Micro Hydro Generator Dc 080V (Black) — Compact, durable turbine generator for lowpressure water power Key benefits Provides reliable DC power from water flow for small electronics and lighting where mains power is not available. Starts at very low water pressure (0.05 MPa) and maintains low flow loss due to optimized water channel design. Water and electricity separation plus double magnetic coupling improves safety and reduces risk of direct electrical contact with water. Compact and lightweight unit (about 90 g) for easy installation in faucets, water heaters, and small plumbing systems. Main features Fourpoint external screw inlet and outlet with approximately 20 mm outer diameter for secure plumbing connections. Stainless steel wire screws and robust construction for longer service life. Lowpressure start and low flow loss design; starting water pressure 0.05 MPa. Water and electricity separation technology combined with a double magnetic coupling clutch. Vortex impeller design with added bearings to reduce wear and increase conversion efficiency. Ironboron strong magnets to enhance power generation capacity. Terminal: 2pin. Axial clearance: 0.2 to 1.0 mm. Mechanical noise: 55 dB. Electrical performance and operation Output peak voltage: 80 V at 1.2 MPa (for models without voltage regulator). Output peak current: 220 mA measured at 12 V. Interline resistance: 10.5 plus or minus 0.5. Insulation resistance: 10 M measured with a DC100 megohm meter. Water outlet closed peak pressure: 0.6 MPa. Peak open pressure of water outlet: 1.2 MPa. Generator life: approximately 3000 hours. Output behavior: for models without a voltage regulator, output voltage is proportional to water pressure. Model and output types Dc 080V (no voltage regulator): Peak voltage up to 80 V. Suitable for directly powering 3 to 12 V LED lights around 10 W, and for charging small batteries. Charging peak current about 220 mA. When charging a small battery, the generator voltage will stabilize near 14 V as charging absorbs produced power. 5V regulated output: Builtin DC 5 V regulator suitable for phone charging and charging lithium cells when used with a charge management chip. 12V regulated output: DC 12 V regulated output suitable for 12 V radios, LED lighting, and charging applications. Compatibility and applications Designed for use with smart faucets, induction cookers, gas water heaters, and other electronic devices that require a matched power supply from flowing water. Compact design and low weight make it suitable for retrofit installation in residential and light commercial plumbing. Typical use scenarios: 1. Powering LED indicator lights and small control electronics inside a smart faucet using the 080 V model or a regulated 5 V or 12 V model. 2. Providing backup power for a small 12 V radio or LED strip in a remote wash area using the 12 V regulated model. 3. Charging a small battery or powering lowpower devices at a campsite or offgrid location when water flow is available, using the 080 V model with appropriate charging circuitry. Mechanical and installation notes Appearance: clean surface, no rust, no obvious scratches, solid structure. Selfcontained installation; unit includes mounting base where applicable. Generator weight about 90 g; compact footprint simplifies integration into existing plumbing. Mechanical noise measured at 55 dB during operation. Package options Type A: 080V yellow water phase generator without voltage regulation x1 Type B: 5V yellow water phase generator x1 Type C: 12V yellow water phase generator x1 Type D: 080V black water phase generator without voltage regulation x1 Type E: 5V black water phase generator x1 Type F: 12V black water phase generator x1 Ordering and selection guidance Choose Dc 080V when you need a simple generator output and plan to use external charging or regulation circuitry. Choose the 5V regulated model for direct USB or phone charging where a stable 5 V output is required. Choose the 12V regulated model for direct 12 V devices such as radios and LED lighting. Technical summary (select values) Starting water pressure: 0.05 MPa Peak open pressure: 1.2 MPa Peak closed outlet pressure: 0.6 MPa Output peak voltage: 80 V (at 1.2 MPa, nonregulated) Output peak current: 220 mA (12 V) Interline resistance: 10.5 plus or minus 0.5 Insulation resistance: 10 M (measured with DC100 megohm meter) Terminal: 2pin Generator life: 3000 hours Weight: about 90 g This micro hydro generator delivers compact, lowpressure starting performance and multiple output options for smallscale waterpowered applications.