Noncontact automatic foaming soap dispenser that also serves as a decorative accent for bathrooms and kitchens. Designed for accurate, touch dispensing and easy monitoring of remaining power and indoor temperature. Key benefits Hygienic touch operation reduces cross contamination and keeps surfaces cleaner. Upgraded sensor chip with accurate recognition and strong glare resistance for reliable dispensing. For performance, mount on the wall approximately 0.65 ft 20 cm from the desktop. Fullscreen display shows remaining power and indoor temperature at a glance so you know when to recharge or refill. Waterresistant design for use in wet environments. Do not wash the machine body with water and keep the sensing area dry. Broad compatibility with common liquid soaps, hand sanitizer, detergent, and shower gel. Efficient foaming when soap and water are diluted 1 to 3, producing rich foam with less product. Large 12 oz 300 ml capacity provides about 500 dispenses per fill, covering roughly 50 days for a typical family before refilling. Product highlights and practical details Function: Noncontact automatic foam dispensing with visual display of power level and indoor temperature. Compatibility: Works with a wide range of liquid soaps and sanitizers; dilute at 1 to 3 for foam. Capacity and performance: 12 oz 300 ml tank, about 500 dispenses per full tank. Installation note: Recommended wall installation placed 0.65 ft 20 cm above the desktop for sensor response. Care instructions: Avoid rinsing the unit body with water and keep the sensor area dry to maintain reliable operation. Use scenarios Kitchen sink: Mount by the sink to dispense foaming dish soap or hand sanitizer for quick, mess handwashing while cooking. Bathroom vanity: Keep on or near the vanity for guest or family handwashing with foam soap and clear monitoring of battery level. Entryway or laundry room: Place near an entry or laundry area to make hand sanitizing convenient without touching the dispenser. Simple tips Dilute liquid soap with water at a 1 to 3 ratio for rich foam and longerlasting refills. Do not spray or rinse the dispenser directly; wipe the exterior with a damp cloth if needed. Follow the recommended mounting distance for sensor performance.