Automatic Strapping Tool Key benefits Save time and labor: combines tensioning, welding, and cutting in one handheld unit so one operator can complete strapping jobs faster. Sealless operation: no buckles or metal seals required, reducing strap waste and simplifying packing. Portable and cordless: rechargeable battery allows operation anywhere when fully charged; no need to plug in during use. Adjustable and powerful: wide tension range suits light to heavy packaging needs. Main features Allinone operation: automatic tension, automatic melting weld, and automatic cut after welding. Compatibility: works with PP (Polypropylene) and PET (Polyester) straps, width 1316 mm (1/2 5/8 inch), thickness 0.41.2 mm (0.016 0.047 inch). Tension range: adjustable from 60 to 2800 N using the control knob, suitable for light bundles up to heavyduty packaging. Battery: 3000 mAh rechargeable lithium battery; full charge in about 90 minutes. Typical output per charge: 100250 straps depending on tension and operating conditions. Battery recharge cycles: up to 2000 charges. Construction: durable strength alloy body, lightweight at 3 kg for easy handling. Package includes: electric strapping machine. How it works (simple steps) 1. Feed the strap around the load and insert strap ends into the machine slot. 2. Press the tension button to tighten to the required force. 3. Press the welding switch; the tool will automatically weld and cut the excess strap. Practical use scenarios Warehouse palletizing: secure boxes and cartons for storage and transport quickly without seals or buckles. Textile and paper rolls: tighten and seal rolls or bundles with consistent tension to prevent slippage during handling. Logistics and metal industry: bundle pipes, profiles, or bundled products where tension and reliable seals are required. Precautions and tips The machine is with a spring set for welding PET straps by default. If you use PP straps, the spring with the PP spring supplied with the machine. On first use, perform several test welds to set the welding time for your strap type. Adjust welding time as needed for temperature changes. In cold conditions, increase welding time slightly to ensure a secure weld. If the machine tightens but does not weld, check that the installed spring matches the strap material. Technical summary Name: Automatic Strapping Tool Battery capacity: 3000 mAh Charging time: about 90 minutes Output per charge: approximately 100250 straps (depending on settings) Material: strength alloy Weight: 3 kg Tensioning force: 602800 N adjustable Strap compatibility: PP and PET, width 1316 mm, thickness 0.41.2 mm This handheld electric strapping tool offers a practical, reliable solution for packing and bundling tasks across paper, light industry, logistics, textile, steel, agriculture, and metal applications, helping improve work efficiency while simplifying the strapping process.