Compact automatic foam dispenser designed for hygiene, economy, and easy cleaning Key benefits Touchless or manual dispensing: choose infrared sensor mode for contactless foam where hygiene matters, or switch to the manual pump for tasks that need extra flow or pressure, such as pet bathing and heavy cleaning. Saves soap and lowers waste: the ultrafine mesh produces rich, dense foam that uses about 30 percent less product compared with typical liquid dispensing. Minimal upkeep and long use between charges: 305 ml reservoir reduces refills, the detachable nozzle makes clog removal quick, and the rechargeable battery delivers reliable standby time. Water resistant for everyday use: IPX5 rating lets you rinse the unit under a faucet without worry. Product highlights and specifications Two dispensing modes: infrared sensor for touchless foam and a manual pump for direct dispensing during pet bathing or surface cleaning. Compatibility: Works with all liquid soaps, shampoos, and detergents when diluted at approximately 1 to 10 or 1 to 20, depending on product thickness. Foam performance: Ultrafine mesh creates dense, longlasting foam for more coverage with less product. Power and charging: Builtin 1200 mAh polymer battery with USBC charging and about 60 days standby on a full charge. Water resistance: IPX5 rated for protection against water jets, allowing direct rinsing under faucets. Capacity and maintenance: 305 ml reservoir reduces refill frequency. Nozzle detaches by rotating clockwise for easy cleaning of clogged mesh. Practical use scenarios Kitchen and bathroom handwashing: touchless infrared foam reduces contact with the dispenser and provides rich foam for quick, efficient handwashing. Pet bathing: switch to manual pump to control flow and produce thicker foam that clings to fur for easier rinsing. Glass, hearth, and stove cleaning: apply dense foam to glass or greasy surfaces for easier wiping with less product. How to use and care Fill the 305 ml tank with diluted soap according to the recommended ratio. Use the infrared sensor for touchless dispensing in daily handwash situations; use the manual pump when higher flow or direct control is needed. Charge via the USBC port. Expect about 60 days of standby time between charges. Rinse the exterior as needed; the IPX5 rating allows safe rinsing under a faucet. To clear clogs, detach the nozzle by rotating it clockwise, clean the mesh, and reattach. This dispenser combines flexible operation, wide liquid compatibility, and low maintenance to reduce product waste and simplify regular cleaning tasks.