Ambersil 31535 Formula Six Medium Duty Silicone Release Agent 400ml 3 Pack

FORMULA SIX is a multi-purpose - medium duty silicone mould release agent. It is based on silicons and has been formulated as a highly effective - general purpose release agent for all thermoplastics and many types of rubber. APPLICATIONS Provides a medium duty film for release of plastic and rubber parts in: Injection moulding Compression moulding Vacuum forming and Many other moulding and forming processes Will not build up in the mould and helps to improve surface finish - reduce rejects and increases production. Fitted with 360 degree spray system for use at any angle - even upside down.Also useful as an anti-stick agent in the: Textiles Foam converting Printing and Shoe industries N.B. Contains silicone so may be unsuitable where decorative work (e.g. painting - plating) is necessary on the moulded part. If a non-silicone product is required - use Formula Seven or Formula Four. Spray a light - even coating from 9 - 12 (25 - 30 cm) and re-apply as necessary. TECHNICAL DATA Appearance : Clear - colourless liquid Odour : Hydrocarbon SG @ 25C : 0.723 Pressure @ 25C : 3.5 Bar Discharge rate : 0.8 g/sec Temperature range : Operational up to 200C Solubility : Soluble in solvents - insoluble in water Flammability : Classified as extremely flammable under current EC Regulations Flashpoint : Not applicable in sealed aerosol Packaging : 400 ml aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.