Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Safety Warnings:
Safety and care instructions for humidifiers include regular cleaning to prevent germs and mold, regularly emptying the water tank when not in use, and avoiding over-humidification in the room, as excessive humidity can promote the growth of microorganisms. In addition, humidifiers should be placed on a stable, flat surface, with sufficient distance from walls and objects and away from heat sources, and care should be taken to ensure the correct water level to avoid overheating or damage. Safety instructions for installation and use Stable surface: Always place the humidifier on a flat, non-slip and sufficiently load-bearing surface. Distances: Be sure to keep a minimum distance of 10 cm from the sides and 20 cm upwards from objects and walls to ensure air circulation. Avoid overheating: Keep the device away from heat sources such as heaters or air conditioners and never cover the vents. Power cable: Pay attention to the cable to avoid tripping hazards and unplug it if there are any unusual smells or noises, as well as before cleaning. Do not touch: Do not touch the device or its components with wet hands or objects. Regular water changes: Fill the water tank with fresh water every day and empty it completely when not in use to prevent the formation of germs. No additional substances: Never use fragrance oils, flavorings or other chemical substances directly in the water tank, as this can damage the device. Avoid excessive humidity: Make sure that the relative humidity in the room does not exceed 60% to prevent mold growth and mite growth. Do not operate without water: Never operate the appliance with an empty water tank. Important notes on cleaning and maintenance Regular cleaning: Clean the water tank regularly from dirt and limescale to ensure the hygiene and performance of the appliance. Drying: After cleaning, all components should be dried thoroughly to prevent the development of bacteria and mold. Device damage: If the humidifier is wet on the outside after filling, wipe it with a dry cloth.
