Professional sanding discs and Die Grinder for commercial or occasional use This kit comprises of a full range of sanding discs (mixed grit), the arbor as well as a die grinder to power them off as wellAIR DIE GRINDER DESCRIPTION1/4" Air die grinderStraight die grinder perfect for access in hard to reach areas Comes with a 1/4" or 6.35mm collet sizeIdeal for grinding, edge blending, porting, polishing, sanding etc... Compact design aids manoeuvrability in tight areas giving you a quality finish in even the tightest areasSPECIFICATIONS• 1/4" Collet • Average air consumption – 4.5 CFM• Air Pressure – 90 PSI• Free Speed 25,000 RPM• Total length 152mm• Complete with spanners to undo or tighten the colletQUICK CHANGE SANDING DISCS / ARBOR DESCRIPTION41pc starter pack 50mm quick change sanding discsQuick change discs simply unscrew them off and screw another one on for simple and convenient use50mm / 2 inch diameter sanding discsSuitable for sanding wood, paint, varnish, plastic, plaster and a wide range of metalsSuitable for grinding, sanding, levelling, blending and finishingAluminium oxide sanding disc for maximum strength and durabilityLong life and excellent anti clogging characteristicsMixed grit sanding pads ranging from 40 grit – 240 gritComes complete with a quick change adapter (this simply can fasten into any drill (battery, electric or air) and as well as this it is also suitable for air die grinders with a maximum RPM of 30,000 RPMQuick change surface rubber backing pad with 6.35mm steel arborCompatible with drill drivers, air and power drillsMaximum 30,000 RPMSET INLCUDES THE FOLLOWING• 1 x quick change backing pad • 10 x 40 Grit quick change discs• 10 x 80 Grit quick change discs• 10 x 120 Grit quick change discs• 10 x 240 Grit quick change discs