CT-90 is a specially formulated cutting - tapping - reaming and drilling lubricant fluid which will not break down under extreme pressure. A coating of CT-90 cutting and tapping fluid will allow swarf and cut chips of metal to be removed by the cutting tool with less friction. CT-90 improves the surface finish and cutting times are reduced.CT-90 cutting and tapping fluid has been formulated to be suitable for all types of steels and ceramics even high tensile steels. Due to the active nature of this product there is a risk of staining if the product is used on some yellow metals. CT-90 cutting and tapping fluid will not mix with water. CT-90 cutting and tapping fluid can be removed with all common industrial degreasers and solvent cleaners. Apply CT-90 cutting and tapping fluid during the drilling operation; it will increase the drilling efficiency and prolong drill bit like. Take with moving parts. During thread cutting apply CT-90 cutting and tapping fluid to the die or tap. CT-90 cutting and tapping fluid is suitable for both machine and hand operation. Use it while threading pipe work to reduce the risk of thread wall deformation. Apply CT-90 to hacksaw blades before and during sawing operation; CT-90 is silicone free. Key Features Drilling - sawing and thread cutting simplified Safe on steels - designed for stainless steel and ceramics Extends tool life High rates of metal removal High anti-weld features Extreme pressure rated lubricant Silicone and CFCs Free Reduces heat and improves surface finish