Professional fluid extractor for commercial or occasional use Manual and pneumatic fluid extractor can be used automatically with standard shop air or manually when compressor air is not available (this makes this tool useable in all sorts of circumstances) This 9-litre (2.35 gallons) capacity fluid extractor is constructed from composite materials for strength and durability Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery This extractor is also suitable for low viscosity fluids such as water so you can also use this item for draining fish tanks, basins and sinks Simple to use simply push the button and this allows you to suck liquids from tanks quickly and easily Stick the extraction tube into the dipstick until the tube reaches the bottom of the oil pan, turn the air valve to open and then push the operating button When the suction unit reaches full the extractor will automatically shut off leaving no spills or mess Comes complete with brake tubes with rubber tubes, extracting tube and main suction tube Supplied with 6mm and 10mm (internal dimensions) suction probes and brake / clutch bleeding hose Use probes to extract engine oil through the dipstick hole Working pressure from 70 - 170 PSI Air inlet size 1/4 BSP Air consumption 5 cfm SPECIFICATIONS • Pneumatic and manual fluid extractor • Total capacity - 9 Litres • Working pressure 70 - 170 PSI • Air Inlet size - 1/4" BSP • Air consumption - 5 CFM • Automatic off switch