Wind Turbine Charge Controller — Automatic Wind Charging and Overcharge Protection Key benefits Reliable automatic charging: Controls wind turbine output to charge a battery automatically and resume charging when battery voltage falls to the recovery level. Battery and turbine protection: Internal brake circuit stops the turbine when the battery is full, preventing overcharge and reducing wear on the turbine. charging capacity: 6000W charging power supports large wind turbine output. Weatherproof and durable: IP67 protection level for outdoor installation. Low standby use: Very low static power consumption of 0.008 A. Main features and performance Charging power: 6000W. Static power consumption: 0.008 A. Protection level: IP67 for dust tight and water resistant operation. Operating temperature range: 35 C to 65 C. Input wiring: threewire system for threephase turbine input. Control mode: supports 12V and 24V battery systems. Installation: bolton mounting for secure attachment. Blade bearing wind speed: level 12. Builtin rectifier and brake module: integrated circuitry improves conversion efficiency and provides automatic braking when needed. Wiring and installation Battery connection: Connect battery positive to the controller positive terminal (red) and battery negative to the controller negative terminal (black). Turbine connection: Connect the threephase output from the wind turbine to the threephase input terminal (green line) on the controller. Important: Follow the schematic figure included with the product. Do not reverse positive and negative poles, as reverse polarity can damage the controller. Mounting: Bolton installation. Ensure secure grounding and weatherproof placement consistent with IP67 rating. Operation and control Automatic charge control: The controller rectifies threephase turbine output and charges the battery. When battery reaches full voltage, the internal circuit engages the brake to stop the turbine. Charging resumes automatically when battery voltage drops to the recovery threshold. Builtin modules: Rectifier and braking functions are enclosed in a builtin module to increase conversion efficiency and reduce external wiring. Compatibility and suitability Compatible with 12V and 24V battery systems. Designed for threephase wind turbines with threewire outputs. Suitable for outdoor installations requiring robust, weatherproof control. Typical applications Offgrid residential systems: Integrate with small to medium wind turbines to maintain battery banks for lighting, appliances, and backup power. Remote equipment power: Provide controlled charging for batteries that power remote monitoring stations, sensors, or communication equipment. Hybrid renewable systems: Use alongside solar arrays and battery banks to manage wind input and protect batteries in combined renewable setups. Packing list 1 Wind Turbine Control 100 percent brand and . Notes and safety Always follow the included wiring schematic and confirm polarity before powering the system. Do not reverse positive and negative connections to avoid damaging the controller. Verify compatibility with your turbine and battery voltage before installation.