COARSE / SISAL MOP -Suitable for removing scratches and bad staining as well as paint and rust. -Fast cutting first stage polishing mop. -Coarse buffing wheel used for the 1st stage of metal polishing -Removes light marks left from preparation and are usually suitable for use with a grey compound -Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials -Fastened together with leather washers for maximum support when using the mop -British Manufactured mops -Suitable for use with a bench grinder / polishing machine -Used on a taper spindle SPECIFIC SPECIFICATIONS -DIAMETER OF THE MOP - 6" (150mm) -WIDTH OF THE MOP 1" (2 ROW) (25mm) -MAXIMUM SPEED 3000RPM WHITE CLOSE STITCHED MOP -Multi layered and tight stitched polishing mop to provide a top quality durable mop -Manufactured from 100% white cotton -Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing. -Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel -Normally used in the middle stage of the polishing process and are usually used with green compound -Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted -Fastened together with leather washers for maximum support when using the mop -Suitable for use straight away -British Manufactured mops -Suitable for use with a bench grinder / polishing machine -Used on a taper spindle SPECIFIC SPECIFICATIONS -DIAMETER OF THE MOP - 6" (150mm) -WIDTH OF THE MOP 1" (2 ROW) (25mm) -MAXIMUM SPEED 3000RPM G LOOSE UNSTITCHED FLOPPY MOP -Suitable for the final stage polishing and finishing on non-ferrous and ferrous surfaces -Most popular grade of finishing mop -100% cotton discs -Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials such as plastics -Also suitable for use on woods and resins -Fastened together with leather washers for maximum support when using the mop -Does not fray or leave as much dust as other finishing mops -British Manufactured mops -Suitable for use with a bench grinder / polishing machine -Used on a taper spindle -Suitable for use straight away -Normally used in the final stage of the polishing process and are usually used with blue compound SPECIFIC SPECIFICATIONS -DIAMETER OF THE MOP - 6" (150mm) -WIDTH OF THE MOP 1" (2 ROW) (25mm) -MAXIMUM SPEED 3000RPM MENZEMA GREY COARSE COMPOUND -Heavy duty compound for hard materials -Suitable for use with a number of materials including steel, stainless steel, iron and titanium -The polishing compound is use by polishers on metals to cut and bring out the colour of the material. -Commonly used with a sisal mop -Long lasting composition with minimum usage -Water soluble -Will not cause any discoloration -Will remove 240 - 320 grit marks -Total weight of the bar 250 grams MENZEMA GREEN PRE POLISHING BUFFING COMPOUND Pre polishing compound that is suitable for all metals. -Dual Purpose medium abrasive compound for first stage polishing of soft materials and final buffing of harder materials. -Commonly used with a sisal stitched mop. -Long Lasting composition with minimum usage. -Suitable for use with a number of materials including steel, stainless steel, iron and titanium -Will not cause any discoloration. -Water Soluble. -Total weight of the bar 250 grams. MENZEMA BLUE FINAL FINISHING COMPOUND -Suitable for the final stage of polishing -Suitable for use with a number of materials including steel, stainless steel, iron and titanium -Recommended for use with final finishing floppy buffing wheels -Long Lasting composition with minimum usage. -Will not cause any discoloration. -Water Soluble. -Total weight of the bar 250 grams. POLISHING SPINDLE -This spindle allows you to convert your bench grinder into a polishing machine -Brings the mop out away from the machine and providing a taper thread for you to attach a mop -Fits virtually all 6" bench grinders (with a 1/2" shaft) -Suitable for a right hand side of your grinder as you look at the front -Fixes via a grub screw (we do not use threaded spindles because you rely on the accuracy of the thread on the grinder which often leads to a wobbly non centres shaft). -Total length of the spindle 4-3/4" / 120mm