Tie Rod / Pitman Arm Tool Kit What’s included - Tie rod spreader with 11/16 inch wedge opening - 2.8 inch handle for use with a regular hammer - Handle with 0.4 inch shank for use with an aim impact hammer - Ball joint separator with 15/16 inch jaw opening - Pitman arm wedge with 1 1/8 inch opening Key benefits — why you need this kit - Faster, safer separations: Purpose-built wedges and a dedicated ball joint separator let you separate tie rod ends, pitman arms, and ball joints without prying or hammering directly on suspension boots or threads. - Fits common component sizes: The 11/16", 15/16", and 1 1/8" openings match many steering and suspension connections for reliable engagement and reduced slippage. - Ready for different hammers: Two handle options (2.8" handle for regular hammer use and a handle with 0.4" shank for use with an aim impact hammer) let you work with the tools and equipment you already own. - Controlled force application: Wedges and jaw-style separation concentrate impact where needed, minimizing collateral damage and simplifying reassembly. Function, compatibility and performance - Function: Designed to spread and wedge steering and suspension joints for safe removal of tie rod ends, pitman arms, and ball joints. - Compatibility: Wedge and jaw opening sizes cover many standard tie rod, pitman arm, and ball joint connections. The 0.4 inch shank handle is sized for use with an aim impact hammer; the 2.8 inch handle is sized for use with a regular hammer. - Performance: Provides secure contact at the joint interface for efficient separation with less risk of slipping or damaging mating components. Typical applications / use scenarios - Replace outer tie rod ends: Use the 11/16 inch tie rod spreader to separate the tie rod end from the steering knuckle without damaging the boot or threads. - Remove a pitman arm during steering gearbox service: Fit the pitman arm wedge with its 1 1/8 inch opening and apply controlled impact using the appropriate handle. - Separate a ball joint when changing control arms or lower arms: Use the 15/16 inch jaw opening ball joint separator to disengage the ball stud from the control arm or knuckle. Notes and usage tips - Choose the handle that matches your hammer type before applying impact. - Position wedges and separator jaws square to the joint to avoid side loading. - Use steady, controlled strikes rather than excessive force to reduce risk to surrounding components.