Compliant with IEEE 802.af Power over Ethernet (10/100M/1000M supported) Key benefits Enables power and data delivery to a single PoE device over standard Ethernet cabling, reducing the need for separate power outlets. Autodetects PoE requirements and protects connected equipment from incorrect installation, helping prevent damage. Simple plugandplay operation with no configuration required, facilitating quick deployments. Uses existing Cat5, Cat5e, Cat6, Cat6e or UTP cables to extend PoE and data to remote locations. What it does A threeport PoE extender that forwards both Ethernet data and PoE power to one terminal equipment via common network cabling. Supports data rates up to 1 Gbps and PoE power as per the IEEE 802.af standard, ensuring compatibility with standard PoE switches and devices. Compatibility and cabling Works with standard PoE switches and PoEenabled devices that adhere to IEEE 802.af. Compatible with Cat5, Cat5e, Cat6, Cat6e and UTP cabling for flexible installation options. Plugandplay operation No configuration or complex setup required; simply connect the extender between the PoE switch and the terminal device. Use scenarios IP camera installation: Place a surveillance camera in a corridor or outdoor area where power outlets are unavailable, using existing Cat5e/6 cabling to supply both power and video/data. Wireless access point deployment: Extend PoE to a wireless AP located away from the network rack, ensuring continuous power and connectivity without nearby power outlets. IP phone or other PoE device: Power and connect a single IP phone in a conference room or office enclosure where only a network drop is available. Technical summary PoE standard: IEEE 802.af Data speeds supported: 10/100/1000 Mbps Port configuration: 3port PoE extender Cable types: Cat5, Cat5e, Cat6, Cat6e, UTP Operation: Plugandplay; no configuration required Protection: Autodetection and protection against incorrect installation to safeguard PoE equipment