Product: 5000W WindSolar Hybrid MPPT Charge Controller Color: 48V Key benefits Maximizes energy harvest from both solar panels and wind turbines using independent MPPT algorithms for each source. Delivers efficient charging to 12V, 24V, or 48V leadacid battery banks with intelligent stepdown solar charging and stepup wind conversion. Protects wind turbines and battery systems with dedicated external dump load terminals that safely divert excess energy during wind conditions. Provides clear system visibility and flexible control through a 320x240 color LCD and simple configuration options. What it does and why you need it Dual MPPT control for solar and wind inputs increases overall energy capture and reduces wasted production when conditions change. Automatic battery voltage detection and selectable charging settings simplify setup for common battery systems without manual voltage matching. External dump load protection prevents overvoltage events on the turbine side, improving system stability for installations exposed to variable wind. Onboard monitoring and adjustable parameters let you tune charge current, set custom voltages, and configure wind turbine pole pairs to match your equipment. Main features Rated power: 5000W hybrid charge controller MPPT: Independent maximum power point tracking for solar input and wind input Display: 320x240 color LCD for realtime monitoring and configuration Battery compatibility: Automatic detection and charging for 12V, 24V, and 48V leadacid batteries Dump load: Dedicated terminals for resistive dump loads to protect turbines during production Controls: Adjustable charge currents, custom voltage parameters, and wind turbine pole pair settings Practical applications Offgrid cabin or small home: Combine roofmounted solar and a backyard wind turbine to charge a 48V battery bank for lighting, refrigeration, and electronics while maximizing energy capture. RV or camper setup: Use solar panels and a compact wind turbine to maintain battery charge during travel and when parked in variable conditions, with easy monitoring from the LCD. Marine and boat systems: Integrate with onboard batteries to keep navigation electronics and systems charged while at anchor, using dump load protection to safeguard the turbine. Installation and performance notes Designed for hybrid systems where both solar panels and wind turbines contribute to a shared battery bank. Configure battery voltage, charge current, and turbine pole pairs through the display before commissioning. Use appropriate resistive dump loads sized for expected excess wind power to ensure reliable overvoltage protection. This controller provides a practical, configurable solution for systems that combine solar and wind generation, improving energy capture and protecting turbine and battery components while offering clear monitoring and control.