Garage Door and MultiFunction Remote Control Cloner Extensive Compatibility This remote control cloner is designed for wide application across numerous chip models. Compatible with most chips including 2260 (all manufacturers), 2262 (all manufacturers), PT2264, SMC5326 (all manufacturers), SC5262, HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, SM5028S, 527 (all manufacturers), and 1527 (all manufacturers). Even if different manufacturers use varied prefixes, compatibility is ensured as long as the chip model number matches. This makes the device suitable for a broad range of remote systems. Versatile Functionality Each button on the remote cloner can store the signal from a different remote control, allowing multiple devices to be controlled with one unit. It is capable of duplicating 99.99% of common fixed code and learning code remote controls, serving as an effective replacement for original remotes. Suitable for electric doors, garage doors, telescopic doors, sliding doors, barrier gates, and rolling shutter doors. Consolidating multiple remotes into one reduces clutter and makes operation more convenient in daily use. Long Range and Stable Operation Featuring a 433 MHz wireless radio frequency, the remote delivers a strong, interference signal. The connection remains stable and can operate through walls, doors, and floors, with a range of up to 50 meters. This provides reliable performance for controlling devices from different parts of the property without lineofsight requirements. Examples of Use 1. wornout garage door remotes while maintaining full control from your car or driveway. 2. Operate a sliding gate and a rolling shutter door from one compact remote. 3. Manage entry barriers and electric doors across multiple buildings with a single unit. Data Clearing Function For resetting the remote and clearing all stored codes, press and hold the A and B buttons together until the LED flashes three times. Release the B button, then press it three times while continuing to hold A. The LED will flash to confirm that all memory data has been erased. To verify, press any button; if the LED flashes briefly and turns off, the code has been successfully cleared. This remote cloner delivers wide compatibility, multidevice control, and dependable range, making it a practical and efficient solution for managing various remotecontrolled systems.