4Pin Aviation Plugs Extension Cable for Vehicle Rear View Camera Video Cord Reliable extension cable designed for reverse camera installations in trucks, buses and passenger vans. The 4Pin male to 4Pin female aviationstyle connection provides secure video and power transmission, while the 4.5 mm PVC jacketed cable resists wear on long runs. Available in four lengths to suit different vehicle sizes and mounting locations. Key benefits Secure, stable connection: 4PIN male and female plugs with locking screws on the female end provide a reliable mechanical and electrical connection for video and power signals. Plug and play activation: connects to the reversing light power supply so the reversing camera can be automatically activated when the vehicle is placed in reverse. Flexible length options: choose from multiple lengths to avoid splicing or extension work and keep cable runs neat and protected. Durable construction: 4.5 mm PVC jacketed cable protects internal conductors from abrasion and environmental exposure during vehicle use. Features and specifications Type: 4Pin Aviation Plugs Cable Connector: 4Pin male to 4Pin female, female connector fitted with locking screws Cable construction: 4.5 mm PVC jacketed cable Length options: 10 m 32.8 ft, 12 m 39.37 ft, 15 m 49.2 ft, 20 m 65.60 ft Application: video and power transmission for reversing cameras on container trucks, buses, minivans and similar vehicles Both ends fitted with plugs for straightforward installation Typical applications Commercial truck installation: run the cable from a roof or rear bumper mounted reverse camera to the cab monitor without cutting factory wiring. Bus and coach setups: provide a long, secure connection between rear cameras and display units across larger vehicles. Minivan or RV installations: use a longer length to reach a dash monitor or rear control module while maintaining a neat, protected route. Package contents 1 PC 4Pin Aviation Plugs Cable Notes Allow 0 to 2 mm variance due to manual measurement. Slight color or appearance differences may occur because of lighting when photographing the product.