Professional brake bleeder wrench set for commercial or occasional use 3pc brake bleeder wrench setDesigned to simplify brake bleedingThe additional ease of access will in many cases allow the operation to bleed the brakes without removing the wheelsThe specialised bleed nipple spanners provide an excellent seal and grip on all sidesThis lowers the risk of parts rounding offLift up design allows the spanner to be lifted and re-positioned without risk of pulling the pipe of the bleed nippleSuitable for releasing and tightening brake bleed nipplesFor brake and clutch hydraulic systems without wheel removalOne man operationOne way valve lets air out but not inCovers bikes / cars and light commercials 12 point sockets so wont slip like normal 6 sided socketsMetric sizes include 8mm, 10mm and 11mm socketsSET INCLUDES THE FOLLOWING• 3 x brake bleed nipple sockets 8mm, 10mm and 11mm • 1.2 metres of silicon hose complete with check valveSIMPLE TO USE• Clean and lubricate the bleed valve then fit the suitable wrench over it • The bleed tube is then fitted onto the nipple (this is built into the wrench) • This allows the wrench to be turned and repositioned without any fear of dragging against the bleed tube or spreading the bleed tube from the valveComes in a blow molded case for easy storage and transportation