2 pieces mini solar panels designed for DIY projects, small electronic devices, and hobby applications. Each panel is epoxy encapsulated for basic durability and delivers a rated output of 6V at 500mA. Compact size and simple wiring make these panels easy to integrate into educational kits, model toys, and lowvoltage charging setups. Key benefits Ready for hobby and DIY use: compact, preassembled panels simplify installation for model boats, small robots, garden sensors, and educational projects. Reliable rated output: each panel is specified at 6V and 500mA, providing consistent performance for lowvoltage applications when exposed to adequate sunlight. Durable construction: epoxyencapsulated photovoltaic cells resist handling during assembly and mounting, reducing the need for additional sealing in typical indoor and sheltered outdoor uses. Easy to integrate: standard leads and a flat square form factor make mounting and wiring straightforward for hobbyists and makers. Important attributes Function: converts sunlight into DC power for small electronics, battery trickle charging with appropriate charge control, and direct powering of lowvoltage loads. Compatibility: suitable for lowvoltage DC circuits, small motors, LED lighting, rechargeable battery packs when used with proper charge controllers, and microcontrollerbased sensor modules. Size: 5.71 in x 5.71 in (145 mm x 145 mm) per panel; compact footprint for tight layouts. Material: epoxyencapsulated photovoltaic cells on a rigid backing for simplified handling and mounting. Performance: rated at 6V and 500mA under standard test conditions; actual output will vary with sunlight intensity and angle. Practical scenarios Model boat or small robot: mount one or two panels on a hobby craft to run small DC motors during daylight, or to maintain battery charge between uses. Educational solar experiments: use the panels in classroom demonstrations to show photovoltaic conversion, measure voltage and current under different lighting conditions, or power sensor circuits. Outdoor sensor or LED lighting: power lowcurrent garden sensors or LED modules for pathway lighting with proper regulation and battery backup for cloudy periods. What is included Two epoxyencapsulated mini solar panels, each rated 6V 500mA, size 145 mm x 145 mm. Installation tips For battery charging, always use an appropriate charge controller or regulator matched to the battery chemistry and capacity. Mount panels where they receive maximum direct sunlight and avoid shading that reduces output. Secure panels with screws or adhesive to a flat surface; protect wiring connections from moisture if used outdoors. Technical summary Quantity: 2 pieces Rated output: 6V, 500mA per panel Dimensions: 5.71 in x 5.71 in (145 mm x 145 mm) Construction: epoxyencapsulated photovoltaic cells This kit provides a compact, easytouse solar power source for hobbyists, educators, and makers who need a reliable lowvoltage input for experiments, small devices, and DIY projects.