Size: 27x15x8cmWeight: 570gHow to use the tools?1. Clean damage surface with a clean wet cloth;2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;6. When dent was removal, clear the glue by alcohol with plastic shovel;7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.Colour: Gold+BlueMaterial: Metal+PlasticPackage Contents:1 x gold puller18 x blue tabs4 x aluminium alloy tabs3 x glue stick(11x27mm)1 x shovel1 x English manualOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.