18M 60FT Video and DC Power AllinOne Cable for Security Camera System Keep installations simple and tidy with a single cable that carries both video and DC power for security cameras. This 18 meter 60 foot allinone cable removes the need to run separate power and video lines, reducing installation time and cable clutter while maintaining reliable signal and power delivery. Key benefits One cable does two jobs: transmits video and supplies DC power to your security camera, simplifying installation and cable management. Long reach: 18 meters 60 feet provides ample distance for most residential and small commercial camera placements. Reliable performance: designed for consistent video signal and steady DC power delivery to help maintain camera operation without extra adapters or runs. Saves time: fewer cable runs and connections mean faster setup and easier troubleshooting. Neat and professional result: fewer visible cables and cleaner routing for wall, ceiling, and outdoor mounting. What it does and who it fits Function: combined video and DC power allinone cable for security camera systems. Compatibility: suitable for security cameras and recorders that require separate video and DC power connections and can accept a single combined cable run. Size: length 18 meters 60 feet to reach camera locations at common mounting distances. Construction: built for routine indoor and outdoor camera installations where a single integrated cable run is preferred. Practical applications Home exterior camera: run one cable from an outdoor camera to an interior power supply and recorder to power the camera and carry its video feed without separate power and video conduits. Small business surveillance: install cameras across a storefront or parking area using single cable runs for each camera to reduce installation complexity and speed deployment. Replacement or upgrade: swap out older, separate power and video cabling with one integrated cable to improve tidiness and reduce points of failure. What to consider when using this cable Verify your camera and recorder accept DC power and video through separate connectors at the device end; this cable combines those functions into a single run but typically terminates to the standard video and DC connectors you use at the equipment. Measure required cable length before installation; 18 meters 60 feet is suitable for many setups but longer runs may require additional planning for power drop or signal integrity. Route and secure the cable to avoid sharp bends, pinch points, and exposure to direct mechanical stress for longer service life. This 18M 60FT Video and DC Power AllinOne Cable offers a straightforward, spacesaving way to connect and power security cameras while keeping installs clean and efficient.