Package contents 1 x generator Overview This pipeline micro hydro generator converts flowing water into electrical energy for lowpower devices. Its compact PVC body and threaded water connections make it suitable for integration into water lines for lighting, sensors, and small electronics where mains power is not available. Key benefits Provides ondemand power from water flow, eliminating the need for external batteries or wiring for small devices. Starts at very low water pressure, so it works with lowflow taps and plumbing systems. Durable construction with stainless steel fasteners, bearings, and an enlarged impeller to improve output and reduce wear. Water and electricity separation plus dual magnetic coupling clutch improve reliability and reduce the risk of water contact with electrical parts. Technical specifications Size: 9.00 x 4.50 x 3.00 cm Color: yellow Material: PVC body with stainless steel machine screws Resistance between wires: 10.5 plus or minus 0.5 ohm Insulation resistance: 10 M ohm measured with DC 100 megohmmeter Starting water pressure: 0.05 MPa Peak outlet opening pressure: 1.2 MPa Closed peak outlet pressure: 0.6 MPa Peak output voltage: 80 V at 1.2 MPa Peak output current: at least 220 mA (at 12 V) Inlet and outlet: external thread, outer diameter approximately 20 mm Design and performance features Lowreluctance, efficiency generator core for improved energy conversion from water flow. Enlarged scroll impeller and added bearings reduce wear and increase mechanical life. Water and electricity separation technology with dual magnetic coupling clutch for safer operation in wet environments. Lowflow loss waterway design maintains household water pressure while producing power. Builtin voltage regulation output suitable for powering 12 V devices such as radios, LED lights, and charging small batteries. Compatibility and typical applications Compatible with standard threaded plumbing connections of about 20 mm outer diameter. Ideal for integration with sensor or induction faucets, shower lighting and audio modules, and small hot water heating controls. Useful in offgrid or remote installations to power 12 V LED lighting, a small radio, or to provide auxiliary power for control electronics in water heaters and solar automatic systems. Installation notes Ensure inlet and outlet threads match your plumbing; use appropriate sealing tape or fittings to prevent leaks. Operate within the specified pressure range for safe, stable output and to avoid exceeding peak pressures. For results, pair with a suitable voltage regulation or storage system when powering sensitive electronics. Package list 1 x generator