Wind Turbine Charge Regulation Controller for 12V Systems, 800W Product overview A purposebuilt charge regulation controller designed to manage power from a small wind turbine into a 12V battery bank. Rated for generator input up to 800W, with a waterproof enclosure for outdoor installation and reliable battery charging regulation. Key benefits Matches turbine output to battery requirements: regulates voltage and charging current so the turbine can charge a 12V battery bank efficiently. Suitable for small wind systems up to 800W: allows use with a wide range of compact wind turbine generators without oversizing the controller. Weather resistant design for outdoor use: waterproof enclosure helps protect electronics when installed on towers or in exposed locations. Simple integration into 12V setups: designed for direct connection between turbine and 12V battery systems to support offgrid power needs. Reduces manual intervention: automated charge regulation decreases the need for frequent monitoring of charging status. Main functions and performance Charge regulation: continuously monitors and controls charging to maintain appropriate battery voltage for 12V systems. Power handling: supports turbine input up to 800W, suitable for small residential and mobile applications. Weather protection: sealed, waterproof construction intended for outdoor installation near the turbine or on a tower. Compatibility: intended for 12V battery banks and wind turbine generators sized to the 800W maximum rating. Compatibility and materials System compatibility: 12V battery systems, including common 12V lead acid or 12V lithium battery banks when used according to battery manufacturer guidance. Generator compatibility: small wind turbine generators with output not exceeding 800W at expected operating conditions. Construction: rugged, weatherproof enclosure designed to withstand outdoor exposure. Electrical terminals and mounting provisions suitable for typical wind power installations. Practical use scenarios Offgrid cabin power: Pair with a 12V battery bank and a small wind turbine to maintain battery charge for lights, refrigeration, and DC loads in remote locations. Mobile and marine auxiliary charging: Install on an RV, boat, or camper to harvest wind energy and charge a 12V house battery bank while stationary or underway. Remote monitoring or communications site: Provide regulated 12V battery charging for remote sensors, repeaters, or telemetry equipment where grid power is not available. Installation and operation notes Intended for integration between a wind turbine generator and a 12V battery bank. Follow wiring practices and battery manufacturer recommendations during installation. Verify turbine output characteristics and system wiring to ensure total input does not exceed the 800W rating. Select appropriate cable sizes and secure mounting to maintain reliable outdoor service. Why choose this controller This controller provides a practical, straightforward solution for regulating windgenerated power into 12V battery systems up to 800W. Its waterproof design and focused feature set make it a suitable option for smallscale wind charging applications where dependable charge regulation and outdoor durability are required.