Wind turbine MPPT charge controller designed for reliable battery charging and turbine protection in small to medium wind systems. Key benefits Maximizes energy harvest using MPPT power point tracking charging to improve conversion efficiency from the wind turbine to the battery. Protects system components with builtin battery overcharge protection, overload protection, wind turbine current limiting, and automatic braking to prevent damage. Low standby current of 3.6mA minimizes battery drain when the controller is idle. Robust aluminum alloy enclosure with good heat dissipation and IP67 protection level for stable longterm operation in dusty or wet conditions. Simple diode indication display for clear system status at a glance. Features and specifications Product type: wind turbine controller Charging mode: MPPT power point tracking Power handling: 6000W Rated current: 30A Rated voltage options: 12V, 24V, 48V, 220V Size: 12V model (other rated voltage options available) Standby current: 3.6mA Display: diode indication Material: aluminum alloy housing for heat dissipation and durability Protection level: IP67 Protection modes: battery overcharge, overload, wind turbine current limiting, automatic braking Practical applications Offgrid cabins and small residential systems: charge battery banks from a small wind turbine while protecting batteries from overcharge and overload. Marine and coastal installations: IP67 protection and aluminum housing provide resistance to moisture and salt spray for use on boats or shorebased systems. Remote equipment and monitoring sites: low standby current and MPPT charging make this controller suitable for remote telecom, weather station, or sensor installations that rely on battery power. What is included 1 x wind power charging controller 1 x instruction manual This controller is intended for integration with wind turbine systems and battery banks at the listed rated voltages. Follow the instruction manual for correct wiring, configuration, and safe operation.