Professional metric and imperial mixed tap and die set for commercial or occasional use 115pc metric and imperial tap and die setPrecision machined tungsten steel taps and diesIdeal for creating and repairing UNF, UNC, Pipe and metric threadsAll the taps and dies are etched with the sizes on for easy identificationSET INCLUDES THE FOLLOWING• 23 x Imperial Taps – 4 – 40, 5 – 40, 6 – 32, 8 – 32, 10 – 24, 10 – 32, 12 – 24, 1/4" x 20, 1/4" x 28, 5/16” x 18, 5/16” x 24, 3/8” x 16, 3/8” x 24, 7/16” x 14, 7/16” x 20, 1/2" x 13, 1/2" x 20, 9/16” x 12, 9/16” x 18, 5/8” x 11, 5/8” x 18, 3/4" x 10 and 3/4" x 16 • 23 x Imperial Dies – 4 – 40, 5 – 40, 8 – 32, 10 – 24, 10 – 32, 12 – 24, 1/4" x 20, 1/4" x 28, 5/16” x 18, 5/16” x 24, 3/8” x 16, 3/8” x 24, 7/16” x 14, 7/16” x 20, 1/2" x 13, 1/2" x 20, 9/16” x 12, 9/16” x 18, 5/8” x 11, 5/8” x 18, 3/4" x 10 and 3/4" x 16• 21 x Metric Taps – M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M7 x 1.0, M8 x 1.0, M8 x 1.25, M9 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 1.5, M12 x 1.25, M12 x 1.75, M14 x 1.5, M14 x 2.0, M16 x 1.5, M16 x 2.0, M18 x 1.5 and M18 x 2.5• 21 x Metric Dies – M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M7 x 1.0, M8 x 1.0, M8 x 1.25, M9 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 1.5, M12 x 1.25, M12 x 1.75, M14 x 1.5, M14 x 2.0, M16 x 1.5, M16 x 2.0, M18 x 1.5 and M18 x 2.5• 4 x Pipe Threads – 1/8” x NPT27, 1/8” x BSP28, 1/4" x NPT18 and 1/4" x BSP19• 2 x die holders • 2 x Straight tap wrench• 1 x T Type tap wrench• 2 x screw pitch gauges – 1 x metric and 1 x imperial• 1 x mini screwdriver • 1 x centre punch• 5 x centre drills – 2.5mm, 3.3mm, 4.2mm, 5.0mm and 6.8mm• 5 x screw extractors – 1 , 2 , 3 , 4 and 5 Comes in a blow molded case for easy storage and transportation