Quantity and models Pack of 10 electromechanical relays from the JQX 62F family, including HF 62F 012 1H, HF62F 024 1H, HF 62F 012 1HT, and similar HF62F variants. Key benefits — why you need these relays Reliable switching for medium AC loads: rated for 16 A at 250 VAC, these relays handle common control and power circuits without frequent replacement. Flexible coil voltage options: available in 12 V and 24 V coil versions (HF62F 024 1H is the 24 V option), so you can match the relay to existing control systems. Simple integration: 4-pin electrical connections make installation straightforward in control panels, relay sockets, or custom PCBs that accept this footprint. Economical multi-pack: ten relays provide spare units for maintenance or multiple installations, reducing downtime and ordering frequency. What it does and how it performs Function: electromechanical switch that opens or closes an AC circuit when its coil is energized. Suitable for switching resistive and inductive loads within the stated ratings. Electrical ratings: switching capacity 16 A, maximum load voltage 250 VAC. Coil operating voltages include 12 V and 24 V as indicated by the specific HF62F model number. Construction and reliability: part of the JQX 62F/HF62F relay family designed for repeated mechanical and electrical switching cycles under the specified load conditions. Important attributes Models included: HF 62F 012 1H, HF62F 024 1H, HF 62F 012 1HT, etc. (total 10 pieces). Pin count: 4 pins for coil/contact connections as per the listed variants. Performance: rated to switch up to 16 A at 250 VAC; coil voltages available in 12 V and 24 V depending on model. Compatibility: compatible with control circuits and relay sockets designed for the JQX 62F / HF62F series and 4‑pin relay arrangements. Typical applications (practical use scenarios) Lighting and heating control: switch AC lighting circuits, heaters, or other household/building loads from a 12 V or 24 V control circuit. Industrial control panels and automation: integrate as a reliable intermediary switch for motors, solenoids, or actuator control within the 16 A / 250 VAC limit. Appliance and equipment service/repair: replace worn relays in appliances or test rigs that require the JQX 62F / HF62F form factor and electrical ratings. Installation and selection notes Match the coil voltage to your control supply (12 V or 24 V). The HF62F 024 1H models are 24 V coil versions; HF 62F 012 variants are 12 V coil versions. Ensure the switched load does not exceed 16 A at 250 VAC and account for inrush current on motors or transformers when selecting a relay. Use appropriate sockets, mounting hardware, and wire gauges for the current rating to maintain safe, reliable operation. Included in the pack Ten (10) JQX 62F / HF62F series relays (mixed HF62F model variants as listed). This pack provides a cost-effective, ready-to-install set of JQX 62F family relays for reliable AC switching at the specified 16 A / 250 VAC rating with 12 V and 24 V coil options.