10M/33ft Network Security Ethernet Extension Cable with BNC and DC Connectors for CCTV IP Camera Key benefits Extends network, video, and power connections up to 10 meters 33 feet to position cameras where needed. Combines Ethernet LAN connectivity with BNC video and DC power connectors so you can route a single cable instead of multiple runs. Simplifies installation and troubleshooting by keeping data, video, and power organized and accessible at the camera end. What this cable does Provides a 10 meter 33 foot extension for Ethernet LAN while also offering BNC and DC power connectors for CCTV and IP camera setups. Use it to lengthen an existing run, a damaged cable, or create a clean, consolidated connection point. Important attributes Function: Ethernet LAN extension plus BNC video and DC power connectors for CCTV and IP camera use. Compatibility: Works with cameras and recording equipment that accept standard RJ45 Ethernet jacks, BNC video connectors, and DC power plugs. Suitable for both IP cameras and analog cameras that require separate video and power lines. Size: 10 meters 33 feet total length for flexible placement of cameras away from network switches or power supplies. Construction: Built with molded connectors and a protective outer jacket to provide secure connections and straightforward routing. Designed for typical CCTV installation environments. Performance: Enables stable transmission of data, video, and power across the specified length when used with compatible equipment and power sources. Practical use scenarios Home or small business security: Move an IP camera to a driveway or corner of a property that is approximately 10 meters from your router or NVR without running separate cables for video and power. Replacement or : Swap in this extension cable to restore connectivity after a damaged run, combining Ethernet, video, and power without additional adapters. Mixed camera systems: Integrate an analog BNC camera with a power supply and networked camera locations where both video and DC power must be extended to a single mounting point. Installation tips Confirm connector types on your camera and recorder before installation to ensure compatibility with RJ45, BNC, and DC jacks. Secure connections and route the cable away from voltage lines or heavy electrical equipment to reduce interference. Check DC polarity and power requirements for the camera to avoid damage during connection. Why choose this cable Straightforward solution for extending network, video, and power to CCTV and IP cameras in one integrated assembly. Clear compatibility with devices that use standard Ethernet, BNC, and DC interfaces makes it a practical choice for repairs, retrofits, and installations. Note Use with compatible network equipment and power supplies. Verify connector types and power specifications before connecting.