1.90 deg elbow fitting with a forged brass body. Ends: 1/2 in male flared to 1/2 in male NPTF. Thread specification: 3/4-16 x 1/2-14. Key benefits - Durable forged brass construction for reliable performance and corrosion resistance in hydraulic applications. - Two compatible end connections (1/2 in male flared and 1/2 in male NPTF) with a compact 1.90 deg bend to fit tight layouts. - SAE 45 deg flare on the end for proven sealing in hydraulic systems. - Wide service range: up to 750 psi and temperatures from -65 to 250 deg F. Compatibility and performance - For use with copper, brass, aluminum, and steel hydraulic tubing. - Suitable for applications requiring a slight bend between 2 tubing runs while maintaining a flare and NPTF connection. - Light and compact: body size 0.59 in; center-to-end 1.16 x 1.13 in; tube wall 0.032 in; weight 0.140 lb. Specifications and dimensions - End connections: 1/2 in male flared; 1/2 in male NPTF - Thread: 3/4-16 x 1/2-14 - Material: Forged brass - Pressure rating: 750 psi - Temperature range: -65 to 250 deg F - SAE flare: 45 deg - Additional dimensions: center-to-end 1.16 x 1.13 in; body size 0.59 in; tube wall 0.032 in Use scenarios - Reconfigure a hydraulic line on a small CNC machine where a 1.90 deg bend is needed between two tube sections with flare and NPTF ports. - Retrofit a hydraulic circuit in an industrial press to achieve the required line orientation without kinks. - Replace a stressed elbow in a steel hydraulic line while maintaining compatibility with copper/brass/aluminum tubing and SAE 45 deg flare fittings.