Blue 100W Vertical Wind Turbogenerator 12V (also available in 24V) Overview This vertical wind turbogenerator combines a permanent magnet iron core, aluminum blades, and an intelligent controller to deliver reliable smallscale power generation. It is designed for easy installation, quiet operation, and durable performance in adverse weather. Key benefits Reliable power for small offgrid systems: Up to 100 W output at a rated wind speed of 13 m/s (42.65 ft/s) with a low starting wind speed and gradual power increase for improved energy capture in variable conditions. Quiet, lowmaintenance operation: Precision double bearings and a stable rotor keep operating noise below 62 dB, minimizing disturbance. Weatherresistant and robust: Aluminumsprayed surfaces, iron core construction, and a spiral blade design reduce horizontal wind pressure and help withstand strong winds. Simple installation and system integration: Supplied controller manages voltage and current with a microprocessor for stable charging, and wiring follows a clear sequence for safe setup. Features Permanent magnet generator with iron core and allcopper windings for efficient conversion. Two aluminum alloy blades with a plasticsprayed finish for corrosion resistance. Intelligent microprocessor controller included for precise current and voltage management and system protection. Autobrake engages at maximum rotor speed of 300 RPM to protect the generator. Spiral blade design that reduces lateral wind load and improves resilience in winds. Quiet operation under 62 dB thanks to precision doublebearing design. Specifications Power: 100 W Rated voltage: 12 V or 24 V (this listing is for the 12 V version) Wheel diameter: 0.4 m (0.4 meters / 1.31 ft) Rated wind speed: 13 m/s (42.65 ft/s) Product dimensions (L x H): 40 x 71 cm (15.75 x 27.95 in) Materials: Iron, aluminum alloy, all copper windings Package weight: 9 kg (19.84 lbs) Package size: 72 x 26 x 21.5 cm (28.34 x 10.24 x 8.46 in) Flange and mounting requirements Flange diameters: 14 mm (0.55 in), 85 mm (3.35 in), 115 mm (4.53 in) Minimum flange thickness: 14 mm (0.55 in) Minimum pylon to flange distance: 20 mm (0.79 in) Adaptable pole diameter range: 56 to 62 mm (2.22 to 2.44 in) Package contents 1 x Wind Turbogenerator (vertical) 1 x Controller (microprocessor type) 1 x English manual Installation and compatibility notes This unit is compatible with gel and leadacid batteries only; do not connect lithium batteries. Correct wiring : wind turbogenerator then controller then battery then inverter then load. Controller wiring: connect the controller three green wires to the fan three wires; polarity for these three wires is not relevant. Connect the red controller wire to the battery positive terminal and the black controller wire to the battery negative terminal. Verify flange and pole dimensions match the specifications before installation. Read the manual and follow the safety and installation instructions in the manual. Use scenarios Remote cabin or offgrid cottage: supplement battery systems for lighting, small appliances, and battery charging. RV and boat auxiliary power: support onboard 12 V systems during windy conditions. Emergency and backup power for small loads: maintain battery charge when primary power is unavailable. Performance and operation Produces continuous power in sustained winds at rated speed, with low starting speed for earlier energy capture. Intelligent controller and autobrake improve matching between turbine and generator and protect the system at rotor speeds. Durable materials and protective finishes minimize maintenance requirements in exposed installations. Additional notes Color may vary slightly due to lighting and screen differences. Allow slight measurement tolerances due to manual measurement.