100 foot BNC video and power cable for surveillance cameras compatible with Lorex FLIR LBV2531SC Description A singlerun cable that carries both analog video and DC power to a compatible security camera. Designed to simplify installation and extend camera reach up to 100 feet without adding separate video and power runs. Key benefits One cable, two functions: combines BNC video connection and power conductors in a single 100 foot cable to reduce clutter and installation time. Long reach: 100 foot length lets you place cameras farther from the recorder or power source without needing additional extenders. Plug and play compatibility: includes standard BNC video connector and DC power connector for direct connection to compatible cameras and recorders. Easier installation and maintenance: fewer cable runs mean faster setup, fewer connection points, and simpler troubleshooting. Reliable signal delivery: designed for stable video transmission and consistent power delivery over the full 100 foot distance. Important attributes Function: transmits analog video and supplies DC power for security cameras. Compatibility: confirmed compatible with Lorex FLIR LBV2531SC security cameras; suitable for other cameras that use a BNC video connector and matching DC power plug. Size: 100 foot cable length to cover common installation distances for residential and commercial surveillance. Connectors: standard BNC video connector and DC power connector for direct camera and recorder hookup. Performance: intended for clear video transfer and steady power delivery at typical CCTV distances. Practical applications Home security: run a single cable from the house interior to an exterior camera mounted on a garage, porch, or gutter line to monitor entries and driveways. Small business surveillance: connect cameras in retail or office spaces to a central recorder located in a back office without multiple runs for video and power. System upgrades and repairs: a worn or damaged cable or extend an existing camera location up to 100 feet from the recorder or power source. Installation notes Confirm the camera and recorder or power adapter use compatible connectors before installation. Route cable along walls, ceilings, or conduit and secure with clips or ties to prevent strain on connectors. For multicamera systems, plan power distribution to ensure each camera receives the correct voltage and current from the power source. This 100 foot BNC video and power cable provides a straightforward, spacesaving way to connect and power compatible surveillance cameras, reducing installation complexity while maintaining reliable video and power delivery.