[Warm Tips] 1. After the shower screen is installed, it is recommended to apply silicone sealant evenly on the edge (this product does not contain silicone sealant) to make the shower screen more durable and waterproof. 2. After the shower baffle is installed, it should be left alone for 30 hours. Do not let the water flow soak the water retaining strip. Wait for the silicone sealant to harden before using it. [Multi-Function] Our shower barrier can be installed on the floor or sink, the outer edge of the countertop, and the space between the countertop and the wall, solving the problems of debris entering the space (1-10mm), water leakage and dripping, countertop leakage, and achieving wet and dry separation. (The shower baffle is only 18mm high so it wont trip us or cause any problems on the counter and is easy to move) [Applicable to various scenarios] The folding shower partition is suitable for all smooth floors and countertops, such as kitchen countertops, sinks, bathroom doors, bathroom corners, bathtub edges, sinks, window sills, balconies, around washing machines, bottoms of washing machines, etc. Toilets, form a spill-proof barrier that effectively repels water and keeps floors and counters clean and tidy. High Quality Silicone MaterialThe shower threshold is made of environmentally friendly elastic silicone with a soft and smooth surface. The silicone material is waterproof and mildew-proof, easy to clean, not easy to discolor and deform, heat-resistant and anti-freeze, suitable for all seasons. The shower threshold and fixing system are equipped with adhesive backing, which has strong adhesion and is not easy to fall off. Easy to InstallWhen installing a shower partition, the floor or countertop must be free of water and dust, otherwise it will affect the bonding effect of the adhesive. You can use a knife to cut the required length, then tear off the adhesive and paste it (when the shower screen needs to be bent, it is recommended to cut it smooth at 45 degrees first, and then cut it at 96 degrees for splicing, which is more stable and durable)